We
offer a full range of IANTD Technical Open Circuit,
CCR, Gas Blender and Technician courses. Our CCR courses
are all taught by Rasmus Lauritsen of Nortech Diving,
European Megalodon IT.
To
book any of the courses, please download and complete
the Booking
Form here, and e-mail it back to us. A
deposit of €100 is required to reserve a place
on the course, and this can be paid on-line by credit
/ debit card via PayPal, by clicking on the links below.
ALL
COURSE PRICES INCLUDE STUDENT MANUALS, REGISTRATION
& CERT FEES'
This
course provides the fundamentals of Nitrox diving,
and introduces the diver to using Nitrox as an
optimum breathing gas, ideally suited for diving
within the 15 – 39 metre range, utilising
EANx mixtures ranging from between 21%-40%, with
emphasis on using ‘standard’ mixes
of 32% & 36%, aimed at maximising bottom time,
reducing or avoiding decompression penalty, and
decreasing Surface Interval. The course is over
2 days and includes 2 dives.
A
3-4 day course that introduces the diver to using
custom Nitrox mixes up to 1.5 bar PO2 for accelerated
decompression, using Nitrox Tables and computers.
Dive planning, gas management and Oxygen servicing
of equipment forms the content of the course,
together with an intensive practical element,
qualifying to 42 metres.The use of twinsets can
also be introduced here. This course is the ‘springboard’
to the technical diving route, and includes 4
dives. It can be combined with the basic Nitrox
course.
The
Technical Diver course introduces the diver to
advanced kit configuration, the use of twinsets
and stages, computer-generated dives tables and
dive planning using custom EANx mixes up to 1.6
bar PO2, for conducting
staged decompression diving to 54m. The course
is conducted over 5 days and includes 5 dives.
This
course introduces the diver to the use of mixed
gas (Trimix), enabling them to build on their
depth experience to conduct planned dives to a
maximum of 60 metres, using gas mixtures with
a minimum 20% Oxygen. Advanced kit configuration,
the use computer-generated dives tables, gas management
and decompression systems form the basis of this
course. The course is conducted over 5 days and
includes a minimum of 5 dives.
Prerequisites:
Min. age 18. Advanced Nitrox or Technical Diver.
This
course qualifies the diver in the use of Trimix
gas mixtures with Hypoxic Oxygen levels of less
than 20%, enabling them to conduct planned dives
to a maximum depth of 100 metres. It builds on
the divers previous knowledge, allowing progressive
build-up of depth and technique. The course is
conducted over 5 days and includes a minimum of
4 dives.
Prerequisites:
Min age 18. Normoxic Trimix + 200 dives.
This
course introduces the diver to the CCR unit of
their choice, qualifying to a depth of 42 metres
using air diluent, or 48 metres if using Helium.
Unit preparation, configuration, basic maintenance,
and operation, together with dive planning and
drills and techniques form the basis of this course.
The course is conducted over 5 days and includes
a minimum of 6 dives / 500 minutes.
MOD
2 - This course is conducted over 5 days and includes
a minimum of 4 dives / 300 minutes. It qualifies
the diver to 60 metres using Normoxic mixtures.
MOD
3 - This course is conducted over 5 days and includes
a minimum of 4 dives / 320 minutes. It qualifies
the diver to 100 metres using Trimix.
Prerequisites:
Min age 18.
MOD
2-
CCR Diver + 20 dives & 25 hours on CCR.
MOD
3
- Normoxic CCR + 200 dives + 50 hours on specific
CCR unit.
Each
1-day course is aimed at the diver who either
intends to mix gas in a branch or dive centre,
or wishes to expand their knowledge of the gas
mixing process. Each course covers blending calculations
and software, blending equipment, gases, Oxygen
cleaning, hazards and risk assessment and is followed
by a practical session calculating and blending
various mixes.
A
comprehensive 1-day course aimed at the diver
who wishes to prepare and service equipment for
Oxygen-use in a dive centre or club, or for their
own use. The course covers cylinders, Oxygen cleaning,
hazards and risk assessment and is followed by
a practical workshop session stripping, cleaning
and re-assembling regulators and valves.
The
course does not replace factory training in regulator
servicing, nor qualify in cylinder inspection
& testing.
Prerequisites:
Price: €235
Book
this course oo
**PLEASE
NOTE THAT TRIMIX COURSES DO
NOT INCLUDE GAS PRICES**
ALL
Course manuals/materials, registration & certificates
fees' and equipment are included in the above prices
but NOT boat fees
Dive-Tek
conduct full Risk Assessments of all diving
activities, dive sites and boats. We operate
a 'best practice' policy for health &
safety procedures, and offer guidance and
advice to Instructors on H&S issues,
including Risk Assessments, operational
and workplace safety and training, in-line
with HSE and EUF policy and ACOP.
Dive
Sites
With
50+metres available just off the beach,
5 minutes from the dive centre in a sheltered
bay, practical skills and course dives can
be attained right up to Normoxic Trimix
level. A short boat trip gives access to
greater depths, enabling use of deco systems,
and the Zenobia provides the utlimate ground
for ERD courses.
